8" BitBuddie


8" BitBuddie

ITEM #: D1908
MSRP: $49.99


The one to eight inch BitBuddie gives contractors a handy way to capture dust and slurry. When core drilling, it captures slurry with up to a 8 inch diameter core bit. Use a utility knife to cut the appropriate sized hole in the BitBuddie to suit your application. When cutting drywall, you can cut a 8 inch long slot in it to accommodate a drywall saw, and you will marvel at how it prevents drywall dust from going everywhere. Every contractor should have a BitBuddie or two in their tool box.

Designed to be used with the Wet Dry DustlessVac, the patented BitBuddie can be used for capturing dust and slurry when drilling or sawing with a variety of tools. ,Fast and easy to use, the BitBuddie is held in place by vacuum suction. No clamps or braces are required. Simply turn on the vacuum and put the BitBuddie where you want it?walls, ceilings or floors?you?re ready to cut or drill.


  • Vacuum shroud used in dust containment while using drills and percussion hammers
  • Captures up to 99% of concrete dust and slurry
  • Works with any drill bit 8” or smaller
  • Made of flexible rubber that sucks to any surface
  • Connects directly to 2.25” hard vacuum cuffs
  • Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment

Includes: (1) 8" BitBuddie

Best For: Dust and slurry removal, especially in tight spaces (faucet holes, light fixtures)

Use With: D1606 HEPA Wet+Dry Vacuum, D1603 Wet+Dry Vacuum, H0302 DustDroid 300 (Dry Only), H0601 DustDroid 600 (Dry Only), H0904/H0901 Slurry Vac (Wet Only)

  • UPC 617450419087
  • Length 14 in.
  • Width 12 in.
  • Height 4 in.
  • Weight 3 lbs
  • Color Clear
  • Warranty 90 Day
  • Port Size 2.25"

Items that will enhance the product's performance

Parts that need to be replaced on a regular basis

  • Features
    • Vacuum shroud used in dust containment while using drills and percussion hammers
    • Captures up to 99% of concrete dust and slurry
    • Works with any drill bit 8” or smaller
    • Made of flexible rubber that sucks to any surface
    • Connects directly to 2.25” hard vacuum cuffs
    • Complies with OSHA Silica Rule and EPA regulations for point-of-origin dust containment

    Includes: (1) 8" BitBuddie

    Best For: Dust and slurry removal, especially in tight spaces (faucet holes, light fixtures)

    Use With: D1606 HEPA Wet+Dry Vacuum, D1603 Wet+Dry Vacuum, H0302 DustDroid 300 (Dry Only), H0601 DustDroid 600 (Dry Only), H0904/H0901 Slurry Vac (Wet Only)

  • Specs
    • UPC 617450419087
    • Length 14 in.
    • Width 12 in.
    • Height 4 in.
    • Weight 3 lbs
    • Color Clear
    • Warranty 90 Day
    • Port Size 2.25"
  • Accessories

    Items that will enhance the product's performance

  • Replacement Parts

    Parts that need to be replaced on a regular basis

  • Similar Items
  • Guides & Documents





Proposition 65 Warning for California Residents

warning symbolWARNING: This product can expose you to chemicals including diethylhexyl phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


The Love-Less Ash Company manufactures dustless ash vacuums and accessories for cleaning fireplaces, wood stoves and grills with "no mess".


Terms of Use   |   Privacy Policy   |  
© Copyright 2024 The Love-Less Ash Company. All rights reserved.